Date: 14th August 1998
Passed today with 913. Got five wrong, not quite sure which one. Overall my test was not so bad, with about 4 scenarios ( 1x with four questions, 2x with two questions and 1 with one question ). I used Sybex and found it very good. The review questions at the end of each chapter were quite close to the ones in the Exam. So I would recommend this book for this test. I emphasis on this test because I read somewhere on this site that Sybex is ""full of hot air""for the IIS4 test.
Here is my braindump. Sorry I cannot remember the exact wording but the general idea is all I can do:
1. A diagram with two subnets. Computer WKT1 and Market server in Subnet One and Server Design in Subnet two. WKT1 can access Design but cannot access Market.
My answer: invalid subnet mask n WKT1. ( two of choices were about default gateway and router, so you are left with two to choose from )
2. A Seattle and Washington WINS server needs to replicate ( required ) and at least once a day ( optional ) and another optional I forgot. Then a table showing Seattle’s push partner is Washington and Washington’s pull partner is Seattle. It looks to me that Seattle is pushing and being pulled and therefore Washington’s WINS is not being replicated to Seattle. So I chose Not meeting required result. I could be worng on this one.
3. A question on a machine "A" doing ARP broadcast when trying to connect to another local machine "B". I choose machine "A" has invalid subnet mask.
4. A lot of questions ( easy ones ) on the utility. Example: capture and decode TCP/IP statistics = NETSTA.EXE; charting into spreadsheet – PERFORMANCE MONITOR; look at changes DHCP made = IPCONFIG.EXE; look at netbios and IP file; NBSTAT.EXE; look at IP address to physical address file: ARP.EXE. Notice that none required I need to know the extension. Very easy questions on the utilities. So don’t worry.
5. A diagram showing about four NT Server looking like routers. You need to add routes to HOST 2 and HOST 3 ( which are located next to each other with HOST 1 and HOST 4 on either side. Four choices. One choice had the wrong route add command ( missing the MASK. I can’t remember which one I chose but just remember the Route ADD command is Route Add [ destination } MASK [ Subnet Mask ] [ default gateway ].
6. The famous LMHost file; You ftp Product and it’s fine but not if you ftp the IP addr
